Dynamic tunable white (often described with CCT), non-addressable: Allows the user to adjust the color temperature output from a single strip light.Single color, non-addressable: Every LED on the strand is a single white colour, typically ranging from 2200K to 6500K in color temperature, or any of several monochrome colors covering the range of the visible spectrum (generally from 400-700 nanometers in wavelength).The most common design differences are in how individual LEDs are controlled, specifically differences in color and whether or not each LED is addressable. Both coated and uncoated LED tapes have a two sided adhesive backing to stick to walls, desks, doors, etc. Water resistant strip lighting is covered in a heat conducting epoxy or silicone to protect the circuitry from direct contact with water, and can be rated IP65, IP67, or with suitable sealed connections IP68. Such tapes are generally low voltage and safe for skin to touch but can be shorted by fine metal objects. Uncoated LED tape is not considered to have any resistance to water ingress, but may be rated with an ingress protection code as IP20 for some physical ingress resistance. Variables in strip lighting consist of water resistance, color, adhesives, choice of SMD, driving voltage, control type, and whether it is constant current or constant voltage layout. Increased luminous efficacy and higher-power SMDs have allowed LED strip lights to be used in applications such as high brightness task lighting, fluorescent and halogen lighting fixture replacements, indirect lighting applications, ultraviolet inspection during manufacturing processes, set and costume design, and growing plants.ĭesign Correlated color temperatures of white light Traditionally, strip lights had been used solely in accent lighting, backlighting, task lighting, and decorative lighting applications, such as cove lighting. For a basic plug-and-play installation, all you need to purchase is the power supply unit.A LED strip, tape, or ribbon light is a flexible circuit board populated by surface-mount light-emitting diodes (SMD LEDs) and other components that usually comes with an adhesive backing. Our realUV power supply plugs directly into the LED strip without the need for assembly, and can power up to 16.4 ft of realUV™ LED strip. We recommend providing an extra 5-15% of "headroom" above the actual LED strip power consumption. Typically, however, it is a good idea not to run a power supply at its maximum capacity. Each 1 foot section consumes 4.5 watts of power - so, for example, a 10 foot section will consume 45 watts of power, and we would therefore recommend a minimum power capacity of 45 watts. The power supply capacity needed is determined by the total length of LED strip connected. DC 12V or DC 24V), and that the power supply capacity is sufficient to operate the length of LED strip. When choosing a power supply unit, you must ensure that the output voltage matches the LED strip voltage (i.e. For most residential and commercial installations, this means that the AC 120V (North America) or AC 240V (Europe) needs to be converted via a power supply unit. This LED strip product requires a DC 12V power supply to operate.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |